Any recommendations on a map case to hold OS maps? Ortlieb have an A4 and an A3 model, I'm not sure if the A3 folded will fit too well inside the BV with a folded map inside it. Or should I just get laminated OS maps and skip the cases bullshit?
Announcement
Collapse
No announcement yet.
Map Case
Collapse
X
-
Originally posted by The real Jack View Post...Or should I just get laminated OS maps and skip the cases bullshit?
if i have to use a large map i just use zip lock pockets - it got 25 15 inch x 20 inch for about £4 - and stuff it into my smock or body armour.
http://www.ebay.co.uk/itm/Grip-Seal-...item8bb659f7ea
i'm happy with them, i did have a fancy Arktis one that was about a metre square - an excellent picnic blankett it was to - but it was just massive when folded up.
- Likes 1
Comment
-
Map cases are a waste of time unless you are a staff officer operating out of a vehicle.Either use a pre laminated OS map(expensive) or find a place that does "soft" lamination that will enable you to fold the map.Cut off the marginal info/legend and have them laminate it to the rear of the map.Before you laminate it highlight all the grid numbers with yellow highlighter(Do NOT!!! use red highlighter as it will be invisible under red filter light).
forget clear contact/fablon as it is a load of c**k and despite your best effort you will always get a bubble in it or an unwanted crease (usually just over the A.O you are in )
When Naving fold the map to the area you are operating in and use black tape to hold the fold.Place in BV zip pocket.Job jobbed."Let us be clear about three facts. First, all battles and all wars are won in the end by the infantryman. Secondly, the infantryman always bears the brunt. His casualties are heavier, he suffers greater extremes of discomfort and fatigue than the other arms. Thirdly, the art of the infantryman is less stereotyped and far harder to acquire in modern war than that of any other arm." ------- Field Marshall Wavell, April 1945.
- Likes 6
Comment
-
Originally posted by The real Jack View PostI mean the waterproofed OS maps that can be bought
Comment
-
I work similar to Ropebag. I'll use a softcopy/photocopy of the AO from an OSI map, print it on an A4 page. On the rear side of it I'll print a satellite image of the same area (usually a screen grab from google maps or OSI, whichever is more recent), leaving a little blank space in the margins for notes / grids etc. Run it through a laminator, stick it in the zip up side pocket and Robert's your father's brother. I keep a big map(s) in the daysack.
For the more regular AOs, time permitting, I overlay a transparent map across a satellite image. Unfortunately, as mentioned in another thread, I've since lost all my pre-made maps due a back-up error. Otherwise I'd have been happy to share them.
- Likes 1
Comment
-
Originally posted by spider pig View PostHow on earth do you get all that done? Especially when moving from AO to AO? Seems like am awful lot of hassle.
S&S, do you grid and scale your aerial photo's?
Comment
-
I have done. I even posted an example a year or two ago. I had the whole Glen area mapped with satellite overlay.
Generally we only exercise in 2 or 3 places regularly, and an A4 page covers a fair chunk of AO for a unit on foot. If we're hopping from map sheet to map sheet (which hasn't happened in my RDF experience thus far) then I'd carry all the respective maps necessary.
I do have a map case, but it is a bit clunky by the time the map is folded and inserted.
Comment
Comment